How to Set Up Scan to Email on an Office Copier

Scan to email on an office copier — US Office FL guide
Short answer

Scan to email means your copier emails a scanned document on its own, straight from the control panel, by signing in to an outgoing mail (SMTP) server you set up once. You need five things: the SMTP server address, the right port, the matching encryption, a valid “from” address, and a sign-in method your mail provider still accepts. On most office copiers it takes about ten minutes—and in 2026, when it stops working, the cause is almost always a change on the email side, not the copier.

Few office features are used as constantly, or set up as rarely, as scan to email. You configure it once when the copier arrives and then forget it exists—until the day it stops. This guide walks through the setup from scratch, shows where the setting hides on Ricoh, Kyocera, and Epson machines, and explains the email-provider changes that are quietly breaking scan to email across offices right now.

What scan to email actually does

Scan to email turns a paper document into a PDF (or image) and sends it to one or more inboxes directly from the copier, with no PC in the loop. The copier acts like a small email client: it connects to an outgoing mail server, signs in, attaches the scan, and sends. That is the whole idea, and it is why setup is really an email-configuration task wearing a copier’s clothes. Get the mail-server details right and it works on the first try; get one field wrong and the panel either errors out or quietly sends nothing. (If your machine does scanning, copying, and faxing from one unit, it’s a multifunction printer, and this all applies.)

What you need before you start

Gather five pieces of information first, because the copier will ask for all of them. Having them in hand before you touch the panel is the difference between a ten-minute setup and an afternoon of guessing.

  • SMTP server — the outgoing mail host, e.g. smtp.office365.com, smtp.gmail.com, or a relay provider’s host.
  • Port — 587 for STARTTLS (most common), 465 for SSL/TLS, or 25 for a direct/relay setup.
  • Encryption — STARTTLS or SSL/TLS; it must match the port you chose.
  • From address — a real, authorized mailbox or an address on a domain you’ve verified.
  • Authentication — username and password, an app password, or OAuth, depending on the provider.

How to set up scan to email on an office copier, step by step

On almost every office copier the sequence is the same five steps, whatever brand sits on the touchscreen:

StepWhat to do
1Confirm the copier is on your network and has an IP address. If you’re not sure, print a configuration or network status page from the panel.
2Open the device’s settings—either on the touchscreen under Scan/Send settings, or, more comfortably, by typing the copier’s IP address into a web browser to reach its built-in admin page.
3Enter the SMTP server, port, and encryption from your list.
4Enter the “from” address and the sign-in credentials the provider requires.
5Add at least one destination to the address book and run a test scan to yourself.

If the test lands in your inbox, you’re done—add the rest of your recipients and shortcuts. If it doesn’t, don’t start changing settings at random; the troubleshooting table below maps the exact on-screen message to its real cause.

Where to find the setting on Ricoh, Kyocera, and Epson MFPs

The menu wording differs by brand, but the destination is the same screen. In every case the device’s web admin page (reached by typing its IP address into a browser) is easier than the touchscreen for typing a server name, and it’s where the real controls live.

  • On a Ricoh MFP, the fields live in the device’s Web Image Monitor under the email/SMTP configuration, or on the panel under Scanner settings; scan-to-email also needs a “from” sender registered first.
  • On a Kyocera MFP, set the SMTP server in Command Center RX (the device’s web page) under Function Settings → E-mail, then build destinations in the address book.
  • On an Epson business MFP, the email server lives in the Web Config page under Network → Email Server, with scan destinations added under the Scan settings.
If your office leases its equipment through us, scan to email is already configured at install—and reconfigured at no charge when your email provider changes the rules, which (see below) is exactly what’s happening this year.

The number-one reason scan to email suddenly stops working in 2026

If scan to email worked for years and then died, often on every device at once, the culprit this year is usually Microsoft, not your hardware. Microsoft is retiring basic authentication (plain username-and-password sign-in) for SMTP AUTH client submission in Exchange Online. Tenants can keep using it until the end of December 2026, when Microsoft disables it by default (an administrator can temporarily reverse the block), with full removal still to be scheduled; any Microsoft 365 tenant created after December 2026 can’t use basic authentication for SMTP at all and must use OAuth. You can read Microsoft’s timeline in this detailed breakdown of the SMTP AUTH retirement. The catch for copiers is that only the device maker can add OAuth support, and many older copiers will never get it.

That leaves three practical paths if your office runs Microsoft 365. You can switch the copier to OAuth if your model supports it; you can route scan-to-email through a dedicated SMTP relay service instead of Exchange Online; or, if you have on-premises Exchange in a hybrid setup, you can send through that, since this change applies only to Exchange Online. The worst option is to do nothing and get surprised when the panel starts returning authentication errors.

Using Gmail or Google Workspace for scan to email

If your “from” account is Gmail or Google Workspace, you can’t just type the mailbox password into the copier anymore. Google removed the old “less secure app” sign-in, so a copier now needs either an App Password or OAuth. An App Password is a 16-digit code you generate in the Google account, and it only works if 2-Step Verification is turned on for that account—that’s the requirement people trip over most. Generate the app password, use it in place of the mailbox password on the copier (server smtp.gmail.com, port 587 with STARTTLS), and the device can sign in again. For a whole office, many admins instead point the copiers at a relay so no single Gmail account carries the load.

Scan to email troubleshooting

When a test scan fails, read the exact words on the panel—each message points to a specific cause. Use this map before you change anything:

What the panel saysMost likely causeFix
“Connection refused,” “cannot connect,” “SMTP gateway not responding,” or a timeoutThe port is blocked or the encryption doesn’t match the portConfirm 587 with STARTTLS (or 465 with SSL/TLS) and make sure the firewall allows that port outbound
“Authentication failed” or “login failed”The provider no longer accepts the password you entered (Microsoft 365 basic-auth retirement; Gmail’s removed password sign-in)Switch to an app password, OAuth, or a dedicated relay
Panel says “Complete” but nothing arrivesThe attachment is too large (a long, high-resolution color scan can pass the common 25 MB inbound limit) or the “from” address is failing spam checksLower the scan resolution or split the job; use a real authorized “from” address; check spam/quarantine
It broke on every device at the same timeAn email-side or network change, not a copier faultCheck the provider’s authentication settings and any recent firewall or DNS changes
Only some recipients receive it (external ones blocked)The sending domain isn’t passing SPF/DKIM, or external relay is disabledVerify domain authentication and allowlist the “from” address

Keep scan to email secure

Scan to email is convenient, which is exactly why it deserves a few guardrails. Send from a dedicated address rather than a personal mailbox, use TLS encryption on the connection, keep the copier’s firmware current, and restrict who can edit the address book so no one quietly redirects scans. If the copier is leased, make sure the scan and address-book data is wiped from its drive at end of lease, the same discipline that protects any document that passes through the machine—we cover that in our guide to leased copier data security. For setup help or a fleet-wide fix, our office copier services team handles it directly.

Key takeaways

  • Scan to email is your copier signing in to an outgoing mail server and sending the scan itself—you configure that server once.
  • You need five things: SMTP server, port, encryption, a valid “from” address, and an accepted sign-in method.
  • In 2026, when scan to email breaks, the cause is almost always an email-provider policy change, not the copier.
  • Microsoft 365: plain-password SMTP is being retired (disabled by default at the end of December 2026, admin-reversible; unavailable for new tenants)—plan for OAuth or a relay.
  • Gmail/Workspace: use an app password with 2-Step Verification on, or a relay. The old password sign-in is gone.

Frequently asked questions

Why does my copier say “scan complete” but no email arrives?

The attachment is probably too large for the recipient’s limit, or the “from” address is being spam-filtered. Lower the resolution or split the document, send from an authorized address, and check the spam or quarantine folder.

What SMTP port should I use for scan to email?

Use 587 with STARTTLS in most cases, or 465 with SSL/TLS; port 25 is for legacy or relay setups. The port has to match the encryption the copier is set to.

Why did scan to email stop working after a Microsoft 365 change?

Microsoft is retiring basic (password) authentication for SMTP in Exchange Online. Switch the copier to OAuth if it’s supported, or route scan-to-email through an SMTP relay service.

Can I use Gmail for scan to email on my office copier?

Yes, but you need an app password generated in the Google account, which requires 2-Step Verification to be turned on; use it with smtp.gmail.com on port 587 with STARTTLS.

Is scan to email secure?

It can be: use TLS, a dedicated sender address, current firmware, and restricted address-book access, and wipe the drive when a leased copier goes back.

Do I need IT to set it up?

Not necessarily—the copier’s web admin page walks you through the fields—but the mail-provider changes in 2026 are where most offices want a hand.

Bill Howard, Office Technology Writer at US Office FL
Bill Howard
Office Technology Writer, US Office FL

Bill Howard writes about office copiers, printers, and managed print for US Office FL, where he helps Orlando and Central Florida businesses choose, lease, and get the most out of their office equipment.

Setting up a new copier, or fighting one that won’t send? We handle scan-to-email setup, fleet migrations, and the 2026 email changes for Central Florida offices.

Request a copier quote

Ready To Schedule your Consultation?

FREE CONSULTATION!

Need Copier Solutions For Your Business - US Office Solutions